Articles

What’s Inside Some of the Modders’ Work Area and MOD Shops

Ask any modder … what is one of the most important thing that you should consider, when it comes to modding? … and most will say, it’s their Work Area. That’s right, you need a decent work area with lots of space, and of course the right tools.

We take a look at some of the work areas of the modders, to see how good their work bench really is, and what tools they use to make their mods come alive!

But first, let me talk about my work area and what tools I use for my mods. You’ll be surprised!

 

Simplicity

Whether you are a beginner or a professional modder, simplicity is the key. Your work bench doesn’t necessarily need to be big, however I do recommend a clean and well organized work bench, although this can be hard at times 😛

 

Safety

Safety is the NUMBER 1 rule. Always wear protection during any modding sessions, especially when cutting your chassis with a Dremel. Goggles, gloves and anything you deem necessary. Losing any of your bodily parts is no fun let me tell you!

 

Space

Use whatever space you have. Be it in the garage, outdoors or even, in my case … the rooftop or stairwell of our apartment. Yes, space in Hong Kong is a premium and flats/apartments have very limited space.

 

The Tools

The Dremel is a MUST for any modder. It’s by far the number one tool, and should be by your side at all times. Not to mention … but the usual pliers, screwdrivers, cutters and self-retracting tape measure are all essential tools needed for successful modding.

 

Hard Tube Loops

For me, this one of the hardest part of modding. But boy! the result just looks amazing! However, it takes a lot of time and patience, not to mention lots of spare tubes to get it right. Here are some of the items you’ll need. Buy the Thermaltake Hard Tube bending kit from Amazon.

  • Silicone Insert
  • Hard Tube Cutter
  • Internal and external reamer (for smooth tube edges)
  • Mandrels (45°, 90°, 180°, and 360°) for maintaining the tubes’ round shapes while bending
  • 1600W or higher Heat-Gun
  • And practice (lots of it)

 

 

PCjunkiemods

Every Artist has their style. Modding PCs is my passion and I like to share my passion with everyone! We specialize in building PCs anywhere from simple desktops to watercooled gaming PCs.

 

KrypteK PC Casemodz

Kryptek PC Mod was started last 2013, and we are accepting PC moddings. PSU sleeving, side panel cutting, psu covers/shroud, acrylic cutting and many more.

More to come …

 

Related posts

Leave a Comment

* By using this form you agree with the storage and handling of your data by this website.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More