MemoryReviewsUnboxing

Patriot Viper Gaming Venom RGB DDR5-7200 32GB Memory Kit Review

Test Rig

For our tests, we used our Test Rig which consists of an Asus ROG Strix Z790-E Gaming Wifi motherboard, along with an Intel Core i9-13900K and a GeForce RTX 3090 graphics card.

 

* ALL tests are conducted at specified default speeds and settings.

CPU Intel Core i9-13900K
Cooling Cooler Master MasterLiquid PL240 Flux AIO
Motherboard Asus ROG Strix Z790-E Gaming Wifi
Ram Patriot Viper Gaming Venom RGB DDR5-7200 32GB Memory Kit
XMP 3.0 profiles YES
SSD Lexar NM800 Pro 2TB PCIE Gen4 NVMe
PSU MSI MPG A1000G PCIE  1000W
VGA card EVGA GeForce RTX 3090
OS
Windows 11

 

Installation

No issues during installation. Just make sure you align the notch to the DIMM slots on the motherboard and insert firmly.

Please take note, as I’ve said before DDR5 ram is not compatible with DDR4, the notch on the memory module is positioned slightly different.

 

BIOS Setup

To set the rated speed of DDR5-7200 using XMP 3.0 Profiles. Just select the XMP Profile 1 in the BIOS and “Save” and that’s it!  All other settings were left untouched on AUTO.

 

CPU-Z and SPD Information

As you can see from the CPU-Z screenshot, the ram supports XMP 3.0 only. The DRAM frequency is running at 3600 MHz which is correct for the default speed of DDR5-7200. The other thing you’ll notice is that the ram is now running in Quad channel mode. Here’s a quick reason why … DDR5 gives you two 32-bit wide (40-bit wide, with ECC) channels per stick, which means that you get a quad-channel configuration when running two DIMMs.

 

 

AIDA64 Memory Information

The SPD information on AIDA64 shows that the Patriot Viper Gaming Venom RGB DDR5-7200 uses memory chips produced by SK Hynix, which are known to overclock very well. CAS lastency is reported at 34-42-42-84 … a high CAS latenct is expected when running DDR5 ram.

 

 

Full Load Temperatures

Load temps reached a high of 33 degrees Celsius which is surprisingly low. I was expecting something a little higher. The heatspreaders seems to be doing an adequate job of cooling the ram. So all good. During our tests, we didn’t encounter any issues whatsoever.

 

Related posts

Leave a Comment

* By using this form you agree with the storage and handling of your data by this website.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More