Lately, it seems that there’s no stopping FSP when comes to releasing new power supplies in the PCIe 5.0 and ATX3.0 standards. Today we will take a closer look at the Hydro G Pro 1000W, which seems to have perfect specifications for high-end gaming computers. I can already tell you that in the upcoming days, we will check one more PSU from the new FSP series, so stay with us if you are planning on a new PSU purchase.
As usual, we will start with specifications and features, and later, I tell you about the efficiency of the Hydro G Pro 1000W PSU.
Let’s begin this review with the key features.
- Complies with ATX12V V3.0 & EPS12V V2.92
- Efficiency ≥ 90% at typical load
- Intelligent fan speed control
- Quiet and long-lasting 120mm FDB fan
- Ribbon cables design for enthusiasts
- Powerful +12V single rail design
- 105C Japanese electrolytic capacitors
- Intel Latest CPU ready
- Full protections: OCP, OVP, SCP, OPP, OTP
- Conformal coatings for harsh environments
New ATX PSU Specifications
Updated ATX 3.0 specifications for the next-generation hardware power demands and ensure users get the most stable and cost-optimized performance possible with the highest power efficiency.
Click here to know more details.
High Compatibility for High Power
The series comes with native PCIe5.0 connector and also supports 3 slots of PCIe 6+2Pin for graphic card, besides, 2 slots of CPU connector for higher performance.
More Powerful with Compact Size
New HYDRO G Pro series upgrades from original HYDRO G, took the best features of HYDRO G series and made them even better. With smaller size, improves performance and more powerful output give you ultra-performance.
Keep in Compliance IEC/EN 62368
FSP Group features the latest in green power technology, and provide a full kinds of additional safety approvals to keep designs ahead of the changing regulations. FSP has upgraded the majority of power supplies to the new IEC/EN 62368 standard for your gaming rigs.
80 Plus® Gold Certification
HYDRO G Pro series is a power supply with 80 PLUS® Gold Certification that guarantees to operate at a minimum of 90% efficiency at 50% load of PSU rated power and as a result to reduce lots of electricity cost.
Compatible with Latest PC-technology
Corresponds exactly to a variety of the latest CPU platform. Complies with Intel ATX12V V3.0 Power supply design guide and make sure the peak power in 12V supports for the latest Intel and AMD platform and delivers full power to your PC system.
The ATX 12V CPU power connector is able to support CPUs for enough watt. HYDRO G PRO series from 850W to 1000W packages 2 x 4+4 pins power connectors more than regular PSUs and provide the stable and peakoutput to your new config will require.
Hydro G Pro is covered with conformal coatings to guarantee reliable performance in a harsh environment. It can work perfectly with 95%RH while others cannot.
LLC Half Bridge Topology with DC-DC Module Design
New HYDRO G Pro series features extremely tight voltage regulation to make the output voltage regulation under +/- 1% at any load change and offer you supreme efficiency and voltage stability.
FSP is committed to manufacturing high-quality and reliable power supplies. The Hydro G Pro series are backed by our 10-year warranty for both service and technically.
- FSP Hydro GT Pro 850W Gold PSU Review
- FSP Dagger Pro 850W SFX PSU Review
- Gigabyte UD850GM PG5 Modular Power Supply Review
- Cougar GEX X2 1000W Power Supply Review
- DeepCool PQ850M 850W 80+ Gold Modular PSU Review
- Thermaltake TOUGHPOWER GF3 1000W Gold Power Supply Review
- MSI MPG A1000G PCIE5 Power Supply Review (with 16-PIN 12VHPWR Connector)