When it comes to PSU releases, there’s no stopping FSP. And every couple of months, we see refreshed versions of the already well-known PSU series. This time, we received the Hydro PTM PRO 1350W for review, which, besides a higher total wattage, brings a revised 12V-2×6 standard for graphics card connectors. The PSU also gives us two of those connectors; both support the most demanding graphics cards.
As usual, we will start with specifications and features, and later, I tell you about the efficiency of the Hydro PTM PRO 1350W PSU.
Let’s begin this review with the key features.
Key Features:
- Complies with ATX12V V3.0 & EPS12V V2.92
- Efficiency ≧92% at typical load (1650W ≧94% at typical load)
- Eco semi-fanless fan control switch
- Quiet and long-lasting 135mm FDB fan
- Ribbon cable design for enthusiasts
- +5V & 3.3V DC to DC module design
- +12V single-rail design
- Japanese electrolytic capacitors
- Changeable side stickers for DIY enthusiasts and gamers
- Complete protection: OCP/OVP/OPP/SCP/OTP/UVP
New ATX PSU Specifications
Updated ATX 3.0 specifications for the next-generation hardware power demands and ensures users to get the most stable and cost-optimized performance possible with the highest power efficiency.
Click here to know more details.
High Compatibility for High Power
The series comes with native PCIe 5.0 connectors and also supports 3 slots of PCIe 6+2Pin for graphic cards, besides 2 slots of CPU connectors for higher performance.
Conformal Coating Application – Off-Wet, Off-Dust and Off-Stain
The conformal coating which protects the power supply and its internal components from dust, humidity, stains. The Hydro PTM PRO series are covered with conformal coating to guarantee reliable performance in a harsh environment and tested to work perfectly even in 95% relative humidity.
Keep in Compliance IEC/EN 62368
FSP Group features the latest in green power technology, and provide a full kinds of additional safety approvals to keep designs ahead of the changing regulations. FSP has upgraded the majority of power supplies to the new IEC/EN 62368 standard for your gaming rigs.
80 Plus® Platinum Certification
Hydro PTM Pro series come with 80 Plus Platinum Certification which means your power supplies consume less heat and have a lower operating cost. The power supplies are guaranteed to operate at a minimum of 92% efficiency at 50% load of PSU rated power.
ECO Switch, Quieter and Longer Lasting Fan
When Eco Button is switched on, the PSU runs with lower power consumption and is whisper silent. The fan in the power supply will not operate when the power supply is under 30% loading for silent state.
Fully Modular Design for Quick and Easy Installation
Fully modular design simplifies installation and allows you to use only the cables you need for a neater, cleaner build.
LLC Full-Bridge Topology with DC-DC Module Design
HYDRO PTM Pro series features extremely tight voltage regulation to make the output voltage regulation under +/- 1% above 10% load change and offer you supreme efficiency and voltage stability.
10-Year Warranty
FSP is committed to manufacturing high-quality and reliable power supplies. The Hydro PTM series are backed by our 10-year warranty.
You can buy the FSP Hydro PTM Pro 1350W
Related articles:
- FSP Hydro PTM Pro 1200W ATX 3.0 PSU Review
- FSP Hydro G Pro 1000W PCIe 5.0 PSU Review
- FSP Hydro GT Pro 850W Gold PSU Review
- FSP Dagger Pro 850W SFX PSU Review
- Gigabyte UD850GM PG5 Modular Power Supply Review
- Cougar GEX X2 1000W Power Supply Review
